♣ CLEAR TO SEE YOUR VISITORS DAY & NIGHT: The wide angle lens, HD camera, and infrared night vision help you to see your visitors clearly no matter day or night.
♣ INSTANT ALERT: Get instant alerts when visitors press the doorbell or when the built-in motion sensor is triggered. Never miss any visitors and secure your home all the day.
♣ CONVENIENT 2-WAY AUDIO INTERCOM: Built-in microphone and speaker with noise cancellation allows hearing and talking to your visitors from a cell phone or tableting remotely. Answer your door wherever you are.
♣ REAL-TIME VIDEO MONITOR: View live video of your front porch at any time anywhere. Or playback to check when necessary. Keep an eye on your home easily.
- Clear Vision: 166° Wide-angle lens, 720P HD camera, and IR night vision function, you can see your visitors before opening the door day and night.
- 2-way Audio Intercom: Hear and talk to visitors from cellphone clearly, answer your door though you are out.
- Instant Alerts: Send alerts instantly to the chime or cellphone to let you know you have visitors.
- Live View: View HD live video of the front door anytime from your phone.
- PIR Motion Detection: Send alert and record video clips when motion detection is triggered.
- Photo Capture & Video Record: Require it to capture a photo or record a video via the APP and saved on your phone.
- 3-way Power Supply: Get power by rechargeable batteries, wired AC or USB cable.
- Resolution: 1280 * 720
- Field of view angle: 166°
- Infrared lamp: 6 * 850mm
- Wi-Fi: IEEE802.11b / g / n
- Storage: 8G / 16G / 32G (Not included SD card)
- Audio: the Two-way conversation with noise cancellation
- Battery: Two 18650 batteries (Not included).
- Notifications: Push notifications in one second
- Device wake-up: within 60ms
- Power consumption: standby 200uA, working 170mA
- Download “XSHCam” APP and install.
- Open APP and tap “ADD DEVICE”.
- Power on the doorbell by charging it with USB cable or input batteries.
- Check the LED on doorbell flashing RED. If not, reset the doorbell. Then tap “THE RED LIGHT IS FLASHING”.
- Tap “ENTER THE CONFIGURATION INTERFACE”.
- Connect the WiFi named “TOSEE_**-**-**”.
- Return to APP and tap “NEXT”.
- Tap your WiFi; Input the WiFi password; Tap “NEXT”.
- Set a password for the doorbell; Tap “NEXT”.
- Set a name for this doorbell; Tap “CONFIRM”; Done.
- The batteries are rechargeable which can be recharged in the doorbell with a USB cable.
- The doorbell can only work with 2.4G WiFi. Do not support 5G.
- 2 x 18650 Batteries not included. Once you put the Batteries inside the unit charge it for 8 hours or more using a Micro USB cable not provided with the unit.
- Batteries not included